CD / MP3 Player
Loading and playing an audio CD
MP3 Recommendations
1. Press STOP/EJECT button on the front panel to open the
disc tray. Place disc on the disc tray with the label side
facing up. Press STOP/EJECT again to close disc tray.
•
Use .mp3 as the extension when converting
audio files into MP3 for saving onto CD-R(W) or
CD-ROM, e.g. Rocky08.mp3. Do not use any other
extension e.g. .doc, .pdf.
BAND/
D
I
G
I
T A
L
•
Do not use the .mp3 extension for other text or
RPT/P
TUNE
non-audio data files as this may result in serious
malfunction and harmful noise interference.
•
Many common CD creator softwares can make
files compatible for the system but do not forget
to finalize your disc after creation. This set cannot
read DirectCD recordings.
•In order to get audio CD quality, you need to
record your MP3 CD at 128 kbps. You can record
up to 256 kbps. Beyond 256 kbps, the unit might
not read the CD.
The disc will be read to detect whether an audio CD or
MP3 CD has been inserted.
•
Do not combine CD Audio and MP3 tracks onto
NOTE
a CD-R(W) or CD-ROM. The player will only
playback CD audio tracks from mixed CD formats.
If the CD is a MP3 audio CD, reading may take up
to 2 minutes.
NOTE
2. Playback begins automatically after the disc has been
read.
• ID3 tag (Album, song, artist name) is not
supported.
MP3
CD
An audio CD
or MP3 icon
will show on the left
•
If over 400 items (songs/folders) are on the disc,
only the first 400 songs can be played.
Resume function does not operate in MP3 mode.
of the display.
•
3. Press PLAY/PAUSE on the main unit or PAUSE on the
remote control to pause playback. Press PLAY/PAUSE again
on the main unit or PLAY on the remote to resume normal
playback.
mp3
The CD/MP3 playback function works in a similar way as
the features available for DVD .
OUND
Press SOURCE on the main unit or DVD source key on the
remote to select DVD/CD input source.
SET +
SOURCE
SURROUND
TV
CD
SAT/
CAB
L
C
R
LS LFE RS
VIDEO/
VCR
ok
/ ECO
PRESET -
PRESET +
L
C
R
LS LFE RS
NOTE
The remote control selector must be set
on dvd/cd.
30
CD / MP3 Player
Se le ct in g a t ra ck
On- screen banner display for CD playback
1. Refer to “General use” to open the track
menu.
Disc type
Track
Intro
icon
Bookmarks
2. Enter track number. Add 0 in front of single-digit track
number (e.g. 9 = 09).
Time display mode
Time indicator
NOTE
NOTE
The remote control selector must be set
on dvd/cd.
You must be in playback mode for track selection.
Sh o rt cu t : enter track number directly using
number buttons to select a track during playback.
Ge n e ra l u se
1. Press INFO on the remote control to hide and show
on- screen banner. (Only audio CD banner)
In t ro Sca n (On ly fo r a u d io CDs)
IntroScan plays the first few seconds of each track.
1. Refer to “General use” to open the IntroScan
menu. IntroScan will start automatically after you
have pressed OK.
TV
SAT/
CAB
2. Press OK again, PLAY or PLAY/PAUSE on the main unit
to end IntroScan. The track that you stopped at will be
played normally.
VIDEO/
VCR
ok
mp3
2. Use the LEFT / RIGHT arrow keys to move cursor on the
OUND
banner. Selected feature icon will be highlighted.
TV
SET +
SAT/
CAB
VIDEO/
VCR
ok
NOTE
3. Press OK to open menu under selected feature.
IntroScan ends when all the tracks have been
played.
TV
SAT/
CAB
VIDEO/
VCR
ok
32
CD / MP3 Player
Cle a rin g b o o km a rks
Bo o km a rks (Au d io CDs On ly)
EN
The bookmarks are cleared each time a disc is removed
from the player or when the power is turned off
completely.
If all 9 bookmarks are in use, you can still mark new points
but the previous bookmarks will be erased.
The bookmark feature allows you to select certain points
on the disc where you want to jump to quickly. 9
bookmarks can be selected.
Tim e d isp la y (Au d io CDs On ly)
1. Refer to “General use” on page 32 to open the time
display menu.
Ad d in g Bo o km a rks (Au d io CDs On ly)
2. Press OK repeatedly to switch among "Track Elapsed",
"Track Remain" , “Disc Elapsed” and “Disc Remain” time
during playback. Selected mode shows on banner.
1. Refer to “General use” on page 32 to open the
bookmark menu.
TV
2. Use the arrow keys to move the cursor (green frame) to
the “Mark” check line, then press OK to add bookmark
when you reach the point you want to do so.
SAT/
CAB
VIDEO/
VCR
ok
TV
TV
SAT/
CAB
SAT/
CAB
VIDEO/
VCR
VIDEO/
VCR
ok
ok
Repeat and random features
There are 5 options for this feature.
3. To add another bookmark, move the cursor to the right
and then press OK when you reach another point you want
to do so.
1. Re p e a t Tra ck – plays one track over repeatedly.
2. Re p e a t Disc – plays the disc you have selected or being
played at the moment over repeatedly.
3. Ra n d o m - plays tracks randomly on one disc. (Audio CD
only)
4. Move cursor to the door icon and then press OK
to exit menu.
4. Ra n d o m Re p e a t Disc - plays tracks randomly and over
repeatedly on disc. (Audio CD only)
5. Re p e a t Off – Ends the repeat function.
Re ca llin g b o o km a rks
Press RPT/PGM on the main unit to toggle among repeat
and press and hold TREBLE key for random.
1. Refer to “General use” on page 32 to open the
bookmark menu.
2. Use the UP arrow to move the cursor (green frame) to
the “Go To” check line and use the LEFT or RIGHT arrow to
the bookmarked point you want to recall.
BAND/APP
RPT/PGM
TREBLE
BAND/APP
RPT/PGM
TREBLE
L
3. Press OK to recall bookmarked point.
TUNE -
TUNE +
TUNE -
TUNE +
TV
TV
SAT/
CAB
SAT/
CAB
VIDEO/
VCR
VIDEO/
VCR
ok
ok
NOTE
Select among the 5 options until the desired one
shows on banner.
4. Use the arrow buttons to move cursor to the door
icon and then press OK to exit menu.
33
CD / MP3 Player
Pro g ra m p la yb a ck
NOTE
Ed it p ro g ra m
You can select at maximum 32 items by repeating
steps 2 - 3.
1. In stop mode, press and hold RPT / PGM on the main
unit to display program edit playlist.
De le t e Pro g ra m
BAND/APP
RPT/PGM
TREBLE
I
G
I
T A
L
1. In stop mode, press and hold RPT / PGM on the main
unit to display program edit playlist.
TUNE -
TUNE +
2. Use the LEFT or RIGHT arrow to select Playlist, then use
the UP or DOWN arrows to select and highlight the
programmed track you want to delete on the playlist.
3. Use the arrow buttons to highlight “Delete” and then
press OK to delete track.
4. Highlight “Play” (to start program playback) or “Done”
(to return to normal playback with program saved) and
then press OK.
In se rt t ra ck
1. In stop mode, press and hold RPT / PGM on the main
unit to display program edit playlist.
2. The box under “TRACK” will be highlighted. Press UP or
DOWN arrow buttons or number buttons to select track.
Press OK.
2. Use the arrows to highlight item on the playlist where
you want to insert a track before it.
TV
3. Refer to “Edit program” to select a track to be inserted.
SAT/
CAB
4. Highlight “Insert” and then press OK
VIDEO/
VCR
ok
5. Highlight “Play” (start program playback) or “Done”
(return to normal playback with program saved) and then
press OK.
TV
SAT/
CAB
Ca n ce l p ro g ra m
VIDEO/
VCR
ok
Program will be cancelled when;
1. disc tray is opened;
2. power is turned off;
3. STOP is pressed twice. The red PGM indicator will
disappear on display and player will resume normal play-
back mode. Nevertheless, the program will remain in mem-
ory and can be recalled by pressing PROGRAM again.
3. “Add” will be highlighted automatically after track is
selected. Press OK to add selected track onto playlist.
4. Repeat steps 2 and 3 to add additional tracks to the pro-
gram.
NOTE
5. Move to highlight “Play” (start program playback) or
“Done” (return to normal playback with program saved)
and then press OK to confirm program playback.
The remote control selector must be set
on dvd/cd.
34
CD / MP3 Player
Fo ld e r m o d e
On- screen display for MP3 playback
Refer to “General Use” on page 32 for basic operations.
NOTE
TV
1. Use the arrow buttons on
the remote to select the fold-
er you wish to play.
EN
SAT/
CAB
VIDEO/
VCR
ok
The remote control selector must be set
on dvd/cd.
No rm a l Pla y
File m o d e
TV
1. Use the UP or DOWN
arrow buttons on the remote
SAT/
CAB
to select the file you wish to
VIDEO/
VCR
ok
begin playing.
2. Press OK to enter the folder and PLAY when in stop
mode or OK when currently playing to begin playback of
all the files in the folder.
OUND
SET +
Playback stops when all files have been played.
3. To exit a folder, use the arrow buttons to select the
RETURN arrow then press OK.
2. Press PLAY on the main unit or on the remote control to
start playback. If you are currently playing, then press OK
button to select a different MP3 to play. All the files or
folders will be played starting with the one you have
selected.
OUND
SET +
Playback stops when all files have been played.
35
CD / MP3 Player
5. Press STOP on the main unit or STOP on the remote to
end program playback.
Pro g ra m Pla y
1. In stop mode, press and hold RPT / PGM on the main
unit to access the program display.
BAND
D
I
G
I
T A
L
The “PROG.” icon will show on the display.
RPT/
TUN
BAND/APP
RPT/PGM
TREBLE
I
G
I
T A
L
6. To play program again, press and hold RPT / PGM on
the main unit while in stop mode to reactivate program
playback. Press PLAY to begin.
TUNE -
TUNE +
2. Use the UP and DOWN arrows on the remote to select
the folder on the left that you wish to add to the program
list.
De le t e a sp e cific File o r Fo ld e r fro m Pro g ra m List
3. Press OK to move the file or folder to the right
programming list.
1. In stop mode, use the LEFT or RIGHT arrows to select
program list, then use the UP or DOWN arrows to select
file to be deleted and press CLEAR to delete.
TV
TV
TV
SAT/
CAB
SAT/
CAB
SAT/
CAB
VIDEO/
VCR
ok
VIDEO/
VCR
ok
VIDEO/
VCR
ok
De le t e All
1. In stop mode, use the LEFT or RIGHT arrows to select
“ALL CLEAR” icon and press OK to clear all.
TV
TV
SAT/
CAB
SAT/
CAB
VIDEO/
VCR
ok
VIDEO/
VCR
ok
4. Once all the files or folders have been selected, Press
PLAY to being program playback.
mp3
ROUND
ESET +
36
|